Post by Mr Trevor on Jan 20, 2012 14:31:24 GMT -5
Upon starting the turntable from the stopped position both the Strobe Illuminator & the Stylus Light begin to flicker. After 1 or 2 seconds they stop flickering and return to normal function, but if I touch the platter or the record at any point, causing the platter to either slow down or speed up, they both begin to flicker once again.
Adjustments to the pitch control have no affect on either light.
If the turntable is powered on but in the stopped position, any adjustments to the platter have no affect on either light.
The turntable in question is a Technics SL-1200M3D.
Upon researching I have found others who experienced what appears to be similar problems, and some have stated that the issue lies with the AN6675 chip. I am not sure how to verify if this is the problem, or how to pinpoint what the problem may be.
Any advice is much appreciated.
Adjustments to the pitch control have no affect on either light.
If the turntable is powered on but in the stopped position, any adjustments to the platter have no affect on either light.
The turntable in question is a Technics SL-1200M3D.
Upon researching I have found others who experienced what appears to be similar problems, and some have stated that the issue lies with the AN6675 chip. I am not sure how to verify if this is the problem, or how to pinpoint what the problem may be.
Any advice is much appreciated.