|
Post by help on Dec 7, 2003 15:15:45 GMT -5
|
|
|
Post by Revolution on Dec 10, 2003 4:38:24 GMT -5
I have one of these that I am replacing the S-shaped tonearm with the ASTS Straight tonearm as a mod for a turntablist client
I'll take a look to see just how the spindle is oriented and see about a replacement for you
thanks Revolution
|
|
|
Post by Alex Hazzard on Feb 17, 2004 16:53:09 GMT -5
i thought i should mention that the problem you have with the spindle oin the arm for the PDX turntable is due to the spindle and the platter not being matched exactly. Using grinding paste on the spindle and platter together will help them bed, making the wobble less and allowing you to scratch without changing the tonearm. Also, check the motor mounts and make sure the screws are tight and have not made themselves loose.This will also cause the spindle to move and cause wobble. Do not tighten too hard, you may split the wood that the motor is mounted to.
|
|
|
Post by buy wow gold on Dec 10, 2009 23:12:05 GMT -5
|
|